• Slide 1

Request Information

FLUTEC™ TG-PPHP

Synonyms: Perfluoroperhydrophenanthrene

CAS Number : 306-91-2

Description & Characteristics

Flutec TG-PPHP,C14F24, is a fully-fluorinated, odourless, colourless, non-volatile liquid with the following characteristics:

  • Compatibility with most construction materials
  • Excellent chemical and thermal stability
  • Non flammability
  • Practically non-toxic1
  • Applications

    Flutec TG-PPHP is used in tracing and tagging applications.

    Safety, Handling and Storage

    Although Flutec TG-PPHP is considered biologically and chemically inert, good laboratory practice should be observed when handling. Flutec TG-PPHP has an indefinite shelf life if properly stored in its original sealed container.  Safety data sheets are available on request.

    Typical Physical Properties
    Boiling Point ℃ 215
    Pour Point ℃ -20
    Molecular Weight 624
    Density, kg/l 2.03
    Viscosity (kinematic), mm2/s 14
    Viscosity, (dynamic), mPas   28.4
    Surface Tension, mN/m 19
    Vapour Pressure, mbar <1
    Heat of vaporisation at Boiling Point, kj/kg 68*
    Specific Heat, kj/kg ℃

    1.07*

    Critical Temperature, ℃ 377*
    Critical Temperature, oK 650*
    Critical Pressure, bar 14.6*
    Critical Volume, l/kg 1.58*
    Resistivity ohm.cm >1013
    Dielectric Breakdown Strength kV/mm 50Hz >13
    Thermal Conductivity, mW/m ℃ 52.6*
    Expansion Coefficient, ℃-1(0℃) 0.00075

    Temperature dependant properties are quoted at 25℃ unless otherwise stated. The above typical physical properties, in no way form or represent product specification.


    pdf print

    Click above button for print ready product data sheet










Feature Products