Flutec PC1, C6F14, is a fully-fluorinated, odourless, colourless liquid with the following characteristics:
High solubility for gases particularly oxygen
Excellent chemical and thermal stability
Flutec PC1 finds may applications in the cosmetic industry where its addition to formulations can enhance protective and film forming properties add texture to mousse type formulation or to assist in creating bubbles in self foaming products.
Safety, Handling and Storage
Although Flutec PC1 is considered biologically and chemically inert, good laboratory practice should be observed when handling. Flutec PC1 has an indefinite shelf life if properly stored in its original sealed container. Safety data sheets are available on request.
Typical Physical Properties
Boiling Point ℃
Pour Point ℃
Viscosity (kinematic), mm2/s
Viscosity, (dynamic), mPas
Surface Tension, mN/m
Vapour Pressure, mbar
Heat of vaporisation at Boiling Point, kj/kg
Specific Heat, kj/kg ℃
Critical Temperature, ℃
Critical Temperature, oK
Critical Pressure, bar
Critical Volume, l/kg
Dielectric Breakdown Strength kV/mm 50Hz
Thermal Conductivity, mW/m ℃
Expansion Coefficient, ℃-1(0℃)
Temperature dependant properties are quoted at 25℃ unless otherwise stated.
The above typical physical properties, in no way form or represent product specification.
Click above button for print ready product data sheet